Prusament Resin BioBased

Charakterystyka

Zalety

Made from plant-based resources
Faint smell of pine trees
Print reliability
Short exposure time
Great print detail

Wady

Non-recyclable
Uncured resin may pose a health risk
Low temperature resistance (50 °C)

Zastosowanie

Model & hobby

With Prusament Resin BioBased, you can produce prints with an amazing level of detail, which makes this material perfect for tiny and detailed action models, prototypes, and large project accessories. Cured material can be easily sanded, both dry and wet.

Rapid prototyping

Short exposure time and the perfect level of detail make the MSLA technology ideal for small and detailed prototypes that can’t be produced with FFF/FDM printers. Plus, the overall MSLA printing time is shorter than with FFF/FDM.

Casting molds

Prusament Resin BioBased60 can be used for making both simple and more complex molds. You can either print a master model (you can make a mold from it) or you can print the mold itself, for example for casting silicone.

Szczegóły

BioBased60 resin is a product with the highest possible content of ingredients obtained from plant-based sources while maintaining exposure times and reliability during printing. We have created a resin with the highest proportion of renewable ingredients on the market which makes no compromises in the level of detail or speed! So, if you’re looking for a printing material that will deliver intricate objects with amazing levels of detail, BioBased60 is a great choice.

The resin BioBased60 got its name because we wanted to reflect the content of plant-based materials in the name. In other words: 60 % of BioBased60 composition is made up of ingredients derived from natural sources. To be a bit more exact and technical: Its acrylic monomers are produced from natural oils and terpenes, such as α-pinene obtained from pine trees (this gives the resin a nice pine-tree-like aroma). This is a major difference compared to conventional “Tough” resins because their ingredients are derived exclusively from petroleum-sourced products.

The resin still requires careful handling (and disposal) like any other resin, so keep that in mind.

Download Safety Data Sheet Natural Yellow (PDF)
Download Safety Data Sheet Herbal Green (PDF)
Download Safety Data Sheet Magma Red (PDF)

Porady i wskazówki dla początkujących

Hollowing the model

Use a Hollowing function in PrusaSlicer to save a considerable amount of material. Don’t forget to create two holes so the resin can be poured out and to counter the vacuum effect during printing.

Sanding

When post-processing tough resin, it’s possible to use both dry and wet sanding.

Printing with the Original Prusa SL1S SPEED

Prusament Resin is fully compatible with third-party MSLA 3D printers. However, it was tailor-made for the Original Prusa SL1S SPEED. In combination with SL1S, you’ll get astonishing speed without losing any print details! Thanks to the monochromatic display and fast tilt mechanism it’s possible to print with exposure as short as 1.6 – 2.4s per layer, depending on the object size and complexity! SL1S SPEED will help you make models with amazing details and much quicker than with other machines, FFF/FDM printers included!

Manipulation with Resin

Shake well before use.
Always use protective equipment. Wear rubber gloves, consider using a half-mask or respirator and avoid direct contact with skin.
Wash your skin with water after any direct contact with liquid resin.
Not fit for human consumption! Avoid contact with children and animals.
The liquid resin may cause an allergic reaction. Seek medical assistance in case of any health issues.
Use isopropyl alcohol (90% or higher) to wash printed models.

Waste disposal

Uncured resin leftovers should be disposed of with other dangerous chemicals at places designated for them. Liquid resin cannot be recycled and definitely should not end in general waste. The same rule applies to bottles, paper towels, and models stained with liquid (uncured) resin. However, cured resin (reactoplastic material) is, unlike filaments (thermoplastic material), a non-recyclable material – it belongs in the general waste.

Prusament Resin was created as a part of the project Photopolymer resins for 3D printing technology (FW01010650), financed with support from Technology Agency of the Czech Republic and Ministry of industry and trade, as a part of Program TREND.