Prusament PETG Magnetite 40%
Prusament PETG Magnetite 40% is a material with paramagnetic properties. This filament is suitable for making various electronic parts, such as switches, potentiometers, induction loops, electromagnetic shielding, etc. In hobby use, the material can be used for various tools that can be attached to a magnet. Another use can be found in art, design, and toys. Or, it can simply work as a weight.
Charakterystyka
Zalety
- Paramagnetic material
- High density (heavy material)
- Visually appealing matt black surface
Wady
- Requires hardened nozzle
- Lower layer-to-layer adhesion compared to pure PETG
- Cannot be transformed into a permanent magnet under home conditions
Zastosowanie
Paramagnetic hardware parts
Anything printed with PETG Magnetite 40% can be attached to a magnet
Electronic parts
Various induction sensors, transformers. switches, etc.
Parts of magnetic boxes
Lids and other parts that should be attracted to a magnet
Art and design
Various magnetic-levitation components, gravity-defying parts, etc.
Magnetic puzzles
Various kinds of magnetic puzzles, even pieces of GeoMag and similar
Visual parts
The Prusament PETG has a very nice matt surface and overall easy printability
Szczegóły
- Printing difficulty
- Medium
- High-temperature resistance
- 93 °C
- Toughness
- Medium
- Susceptibility to warping
- Low
- Odor
- Negligible
- Post processing
- Easy
- Solubility
- Difficult
- In dangerous chemicals
- Elasticity
- Low
- Print speed
- Fast
- Abrasivity
- High
- Hardened nozzle required
Prusament PETG Magnetite 40% is a material with paramagnetic properties. This filament is suitable for making various electronic parts, such as switches, potentiometers, induction loops, electromagnetic shielding, etc. In hobby use, the material can be used for various tools that can be attached to a magnet. Another use can be found in art, design, and toys. Or, it can simply work as a weight.
This material is filled with fine magnetite powder, which gives the material its extraordinary properties, however, the magnetite particles inside are highly abrasive and require using a hardened nozzle.
Download Safety Data Sheet (PDF)
Printer requirements
| Bed | Temperature: 100 ± 10 °C Enclosure not required |
|---|---|
| Print Surface | Textured sheet Satin sheet |
| Extruder | Temperature: 270 ± 5 °C Hardened nozzle required |
Dostępne kolory
Porady i wskazówki dla początkujących
Print surface preparation
To achieve the best adhesion of the print surface, it is important to keep it clean. Using isopropyl alcohol is not recommended, because the adhesion may be too strong. You can use the glue stick as a separator however, a better choice is a window cleaner.
Pour a small amount of window cleaner on an unscented paper towel and wipe the print surface. The bed should be cleaned when it’s cold for the best results. If it is cleaned when already preheated for PETG, keep in mind that the cleaner will evaporate before it can clean anything. Alternatively, you can clean the bed with warm water and a few drops of dish soap on a paper towel.
Sanding
When post-processing Prusament PETG Magnetite 40%, it’s possible to use both dry and wet sanding.
PETG Magnetite 40% wydruków
