Prusament logo
  • Características
  • Materiales
  • Resinas
  • Comprueba tu bobina
    • Español
      • Inglés
      • Checo
      • Italiano
      • Polaco
      • Alemán
      • Francés
×
  • Características
  • Materiales
  • Resinas
  • Comprueba tu bobina

Prusament PP Carbon Fiber

Prusament PP is our own in-house made filament with ±0.04mm manufacturing tolerance. The material is filled with carbon fibers to increase its dimensional stability. Its main advantage is great chemical and high-temperature resistance.

COMPRAR DESDE NUESTRA E-SHOP Descargar hoja técnica

Características

Pros

  • High-temperature resistance (up to 120 °C)
  • Very good chemical resistance
  • Lightweight material
  • Visually appealing matt black surface
  • Great dimensional stability – possible to print large models without an enclosure
  • Uses recycled carbon fibers from the manufacturing process
  • Drying not necessary

Contras

  • A special print sheet (or separation layer) is required
  • Requires hardened nozzle
  • Lower layer-to-layer adhesion compared to pure PP

Uso

Canister lid

Replacement of chemical-resistant parts

Vial stands

Heat and chemical-resistant components usable in a lab

Chlorine pool dispenser

Chemical resistant part

Chemically resistant canister

Another example of chemically resistant components

Model of exhaust pipes

Example of well-printed visual component

Detalles

Printing difficulty
Medium
High-temperature resistance
120 °C
Toughness
Good
Susceptibility to warping
None
Odor
Mild
Post processing
Easy
Solubility
Difficult
In dangerous chemicals
Elasticity
None
Print speed
Fast
Abrasivity
High
Hardened nozzle required

Prusament PP Carbon Fiber is a lightweight material with exceptional chemical resistance. It resists various solvents, non-oxidized bases, acids, and oils. The high chemical resistance makes it perfectly suitable for printing laboratory equipment, various parts in the automotive industry, and more. Its lightweight properties also make it suitable for the aerospace industry, as well as for use in hobby RC aircraft.

This material is filled with carbon fibers to improve its dimensional stability. You can use Prusament PP Carbon Fiber to print large models without an enclosure, which is something that can’t be achieved when printing pure polypropylene. However, the carbon fibers inside are highly abrasive and require using a hardened nozzle.

Download Safety Data Sheet (PDF)

Printer requirements

 

Bed Temperature: 85 ± 10 °C
Enclosure not required
Print Surface PP sheet
Smooth PEI sheet with PP tape
Extruder Temperature: 270 ± 10 °C
Hardened nozzle required

 

Colores disponibles

Black 69.99 USD / 74.99 EUR (IVA incl.) Comprar ahora

Consejos y trucos para principiantes

Print surface preparation

We wanted to make our new PP as easy to print as possible. That’s why we developed a brand new PP sheet, which is the best solution for printing polypropylene-based materials. With regular PEI sheets, you will face extremely low surface adhesion, which can be improved only by using additional accessories, like polypropylene tape. Preparing such a separation layer takes some time and requires some skill, plus the tape leaves glue on the print surface. With the PP Sheet, all you need to do is to swap the sheets and degrease the surface with IPA as usual.

Pour a small amount of IPA on an unscented paper towel and wipe the print surface. The bed should be cleaned when it’s cold for the best results but it can also be cleaned when already preheated for PP, just be careful not to touch the bed surface or the nozzle. But keep in mind that when cleaning at higher temperatures, the alcohol will evaporate before it can clean anything. Alternatively, you can clean the bed with warm water and a few drops of dish soap on a paper towel. Denatured alcohol is also another option.

Postprocessing

PP can be postprocessed with sandpaper, razor blades, and a variety of other instruments. Wet sanding is recommended (due to airborne particles) but not necessary as the material doesn’t deform under the heat caused by friction.

 

PP Carbon Fiber impresiones destacadas

Lion model made by 3DWP.nl, download STL   |   PETG Clamp model by InquisitiveKangaroo, download STL   |   2025 © Prusa Polymers a.s.